home >> CZM news >>October 10, 2006
Additional Sampling on TAG Property Continues to Expand Main Zone
Vancouver, B.C., Canada, CZM Capital Corp., (TSXV: CZM), is pleased to announce that additional sampling in drill holes TAG-06-02, 03, 04 and 06 has extended the widths of the "Main Zone" in all four holes beyond the widths previously reported (Press Release June 21, 2006). A number of narrow gold-silver intersections were also identified by the additional sampling. The re-stated weight averaged intersections are listed below along with the previously reported intersections for comparison.
| Hole No | From m | To m | Int. m | Au g/t | Ag g/t |
| Re-stated intersections | |||||
| TAG-06-02 | 16.8 | 19.0 | 2.2 | 1.5 | 12.4 |
| 27.7 | 29.8 | 2.1 | 1.1 | 1.7 | |
| 36.0 | 51.1 | 15.1 | 2.1 | 10.7 | |
| TAG-06-03 | 25.85 | 43.3 | 17.45 | 2.3 | 11.7 |
| TAG-06-04 | 34.65 | 36.1 | 1.45 | 3.1 | 20.7 |
| 43.75 | 54.2 | 10.45 | 2.0 | 10.6 | |
| TAG-06-06 | 45.1 | 59.4 | 14.3 | 1.9 | 15.0 |
| Previously reported intersections | |||||
| TAG-06-02 | 38.45 | 51.25 | 12.80 | 2.4 | 11.2 |
| TAG-06-03 | 30.8 | 43.25 | 12.45 | 2.7 | 15.1 |
| TAG-06-04 | 45.05 | 54.0 | 8.95 | 2.3 | 11.9 |
| TAG-06-06 | 52.15 | 58.35 | 6.20 | 3.2 | 30.7 |
The results reported above are from a second batch of samples from a re-logging and additional sampling program completed in late August to early September 2006. Results are pending for a third batch of additional samples that were taken from the "Bearox Zone". The Main and Bearox zones are separated by 700m and consist of quartz breccia and stockwork veining at the far south end of the "025 Fault". This gold-silver bearing structure continues and remains untested northward from the Main and Bearox Zones over a 6km length of the TAG property located approximately 35km due west of Atlin in Northern B.C.
Mobilization and camp construction for the second round of drilling on the TAG property are progressing on schedule. It is expected that drilling will begin shortly after the camp and drill sites are prepared.
All analytical work was conducted by Bourlamaque Assay Laboratories Ltd. ("Bourlamaque") in Val d'Or, Quebec. Bourlamaque is not accredited but it is independent, maintains an internal quality control program and participates annually in CANMET round-robin proficiency testing. Gold was determined by conventional 30g fire assay-atomic absorption finish method. Silver was determined by aqua regia digestion-atomic absorption finish method. Mark Fekete, P.Geo is the designated "qualified person" as defined in Section 1.2 in and for the purposes of National Instrument 43-101 responsible for the preparation of this release.
About CZM Capital Corp.
CZM Capital Corp. is a resource exploration company focused on the exploration and development of precious metal properties in Canada.
On behalf of CZM Capital Corp.,
Zachery Dingsdale
President & CEO
CZM Capital Corp. is a resource exploration company focused on the exploration and development of precious and base metal properties in Canada.
Please read our Disclaimer.
For further information please fill out an Information Request Form or call
1-905-377-0989.

